Canon Ts3322 Printer

How To Connect Canon Ts3322 Printer To Wifi

How To Connect Canon Ts3322 Printer To Wifi

The Canon TS3322 All-in-One Printer was created with efficiency in mind. The CANON TS3322 is more than just a printer, with an easy-to-replace 2-cartridge FINE Hybrid Ink System, advanced settings through Wireless Connect, a Rear Paper Tray for fast and easy reloading of plain or picture paper, and a flatbed scanner. You can print from your smartphone or tablet, as well as laptops and PCs with built-in Wi-Fi, using the Canon Print app. It merely takes a few minutes to set up a Wi-Fi connection from your phone.

With only two FINE CARTRIDGES required for great print quality, the CANON TS3322 setup is simple to operate and replace. You can print from any location, including laptops, tablets, and cellphones, thanks to the built-in Wifi.

The Canon TS3322  setup wireless printer is simple to set up. To learn how to connect Canon TS3322 and troubleshoot some of the most common Canon TS3222 setup, read this guide carefully.

Manually configure or install the Canon pixma TS3322

To get the most out of your Canon TS3322 printer, you must first go through the Canon TS3322 setup process. Before you begin installing the Canon pixma TS3322, make sure you have a secure internet connection and note down the SSID name and wireless network key. Before manually setting up the Canon TS3322 setup Wireless Printer, read the following instructions carefully:

  • Activate the printer.
  • On the printer, select the Easy Wireless Connect option.
  • Press and hold the Direct button for a few seconds.
  • From the control panel, select the Startup option.
  • If you agree to the Licence Agreement, choose “Yes” for your area.
  • You can choose the connecting method by selecting “Next.”
  • Choose your SSID from the list of available wireless networks.
  • Fill in the blanks with the password for your network.
  • Before following the on-screen instructions, wait until the network setting is complete.
  • When the Canon TS3322 Setup is finished, click “Complete” to finish the installation.

Canon TS3322 setup Wireless

How can I install my Canon TS3322 printer to connect to my wireless network?

Before you begin the process of manually connecting your Canon TS3322 printer to Wi-Fi, you must first set up your printer by following the instructions above. Then, if you have one, connect your printer to Wi-Fi using the Canon TS3322 printer driver CD. The Canon TS3322 printer driver is also available on Canon’s official website. To connect a Canon TS3322 setup printer to Wi-Fi, follow the steps below:

  • Make sure the printer is turned on.
  • Press and hold the power button for a few seconds to switch on your printer.
  • Keep the home button on your printer’s Control Panel pressed.
  • Select Wireless Settings from the drop-down menu.
  • To configure your wireless LAN, go to the Wireless LAN Configuration page.
  • Choose “basic wifi connect” from the drop-down menu.
  • Yes is the answer.
  • Choose your favourite wireless network.
  • Enter the password for your WiFi network.
  • Return to the configuration application screen and finish the setup once the printer planning is complete.

Canon TS 3322 setup Wireless for Mac

Follow the steps below to connect your Canon TS3322 setup printer to your Mac:

  • Press the control button to turn on your printer.
  • Go to the Control Panel and click Wireless Configuration to get to the wireless configuration option.
  • Select the wireless connectivity option.
  • Go to the Canon website or insert the setup CD into your device to retrieve your printer driver.
  • Go to your Mac’s download folder once the Canon TS3322 setup driver download is complete.
  • From the configuration wizard tab, select next.
  • Select the install helper option after entering your device’s username and password.
  • Select the option to begin the configuration procedure.
  • Choose an appropriate location and proceed to the next stage.
  • Select yes to accept the licence agreement.

Canon TS3322 Setup wireless for Windows

To wirelessly configure the Canon TS3322 Printer on a Windows device, follow the steps below:

To acquire the Canon TS3322 driver, you can either import and run the setup file from the setup CD or go to the Canon official website.

  • Open the file after it has finished downloading and pick the Start Setup option.
  • Before selecting the next button, be sure you’ve chosen an appropriate location.
  • Select yes to accept the licence agreement.
  • On the survey, select I accept.
  • Choose one of the following options.
  • Select yes when the appropriate form appears.
  • From the selection, select the wireless router that best meets your needs.
  • Click next after you’ve provided your network key password.
  • Continue pressing the next button until the connection is complete.
  • A print screen will appear on the screen.
  • To run the test print, follow the computer’s instructions.

Installation and Refilling Canon TS3322 Ink Cartridges

To complete the Canon TS3322 ink refill, follow the steps below:

  • Make sure the printer is turned on.
  • Raise the lid or cover of the scanning machine.
  • The print head’s holder will be repositioned.
  • Pull the cartridge and press tab A to remove it when the ink cartridge is empty.
  • Remove the orange safety tape and film from the new ink cartridge’s container.
  • With the orange safety cover facing up and the white outline air hole clear, hold the Canon TS3322 ink cartridge.
  • Raise the tab to remove the orange safety band.
  • Insert the front side of the ink cartridge into the print head at a progressive tilt.
  • Check the label on the ink cartridge to determine if it’s the same as the one on the printer.
  • Press down on the top of the ink cartridge until it snaps into position to install it.
  • On the scanner, close the cover.
  • You’ve finished installing the Canon TS3322 ink cartridges.

Troubleshooting Canon TS3322 setup Wireless

What is causing my Canon TS3322 printer to stop printing?

If your Canon TS3322 printer isn’t printing, make sure it’s connected to the device properly. Check to see if the printer and computer are both connected to the same wireless network. Make sure the printer settings match the settings on the back tray. Finally, delete any print jobs that are no longer needed from your printer. If the problem persists, reinstall the Canon TS3322 Printer Driver.

What is the specific issue with my Canon TS3322 scanner?

A number of things could be causing your Canon TS3322 scanning problem.

Take the following actions to solve the problem:

  • Install and turn on the Canon TS3322 printer.
  • Connect the USB cord (included with the printer) to your computer’s USB port.
  • Examine the network’s connectivity status. If there is a problem, reset the connection setup.
  • Reboot your computer and do a file scan.

What should I do if my Canon TS3322 printer won’t print?

The following are the steps to fixing your offline error:

  • Go to your laptop’s start menu.
  • Select the Control Panel from the start menu.
  • Go to the control panel to choose devices and printers.
  • When you right-click on your printer icon, select Use Printer Online from the drop-down menu.

What is the best way to complete the Canon TS3322 wifi setup?

Finish your Canon Pixma wireless setup by following the steps outlined below.

  • Turn on the Easy Wireless Connect function on the printer.
  • Hold down the Direct button for a few seconds.
  • Select the Start-up option from the main menu.
  • If you agree to the Licence Agreement, select your area and click “Yes.”
  • You can select the connection method by selecting “Next.”
  • Choose your SSID from the list of available wireless networks.
  • Here’s where you’ll enter the password for your network.
  • Wait for the network configuration to finish before proceeding with the on-screen instructions.
  • When the Canon TS3322 Setup is finished, click “Complete” to finish the process.

What are the print quality settings available on the Canon TS3322?

To change the print quality on your Canon TS3322, follow the steps below:

  • On your computer, go to the Printer Driver Configuration Wizard and select “Print Quality.”
  • Select the Custom option from the Main tab.
  • Press OK after selecting “Print Quality Level” from the Custom dialogue box.
  • The print output standard is correctly set till the configuration process is completed.

How do you clear a paper jam in a Canon TS3322 printer?

To fix your paper jamming problem, follow the steps below:

  • Turn the printer off and unplug it.
  • Remove the printer’s front cover.
  • To remove the print head, pull it to the right.
  • As you slide the printer to the right, the gears will become visible; slowly crank the gears back and forth a few times.
  • After restarting your printer, print a test sheet.

Remarks– This is not Canon official page & here we provided for your knowledge purpose only. For complete disclaimer ‘Read More

Read More: Canon Printer Going Offline Fix

Leave a Comment

Your email address will not be published. Required fields are marked *