Canon Pixma Ts3122 Setup

Canon Pixma Ts3122 Setup

As a widely recognised and distinctive brand, Canon is known for its high-quality products. Canon also sells printers, cameras, and a vast assortment of other premium products. As a result of their enhanced print quality features, Canon printers have gained the attention of a global audience.

This article covers the Canon Pixma Ts3122 setup in detail. It’s a wireless inkjet printer that makes crisp paper prints. It’s also a great tool for printing high-quality photos quickly. Thanks to the seamless wifi connection, everybody in the house may print from any room.

  • Make sure you have good internet access before beginning the Canon Pixma Ts3122 setup process.
  • After that, connect and power up your printer.
  • Check that the light next to the power button is green to ensure that the printer is correctly connected in.
  • Before pushing the stop button, be sure the power light is blinking.
  • Then, hold down the direct button until the icon flashes.
  • At this time, your printer will enter simple wireless communication mode.
  • Furthermore, you must get the programme from the tool’s official website, Ij.Start.Cannon.
  • To accomplish this, please enter the supplied CD-ROM that came with your Canon Pixma printer into your computer.
  • You can also go to the software’s official website by clicking here.
  • Go to the website and click on the red “SET UP” button to download.
  • A new window will also display on your screen, inviting you to enter the correct product name in the appropriate box and click the “OK” button.
  • Following that, another box will open; select the “SETUP” option to proceed.
  • If you are using Windows 9 or later, the following messages will appear on your computer: for example, “RUN,” “Save As,” and “Cancel.”

Save it to any location by selecting “Save As” from the save menu.

  • Then, still in the same window, click the greyed-out “Download” button.
  • After that, pick “Run,” and then open the downloaded file on your computer to begin.
  • When the download is finished, the “Start Canon Printer Setup” option will display in green; please select it and continue.
  • We ask that you be patient and stay in the same window throughout the entire procedure.
  • Please select a country or region from the table on your screen and then press the “NEXT” button in the bottom right corner of the same window.
  • The licence agreement screen will appear shortly after; please read it carefully before pressing “YES” to proceed.
  • Then your screen will display the “Extended Survey Program” page. Please pick “AGREE” from the drop-down menu to proceed.
  • Then, pick “Next” and press the “YES” button.
  • After that, enter your Wireless Network Password and click “Next.”
  • Please click “NEXT” when the connection is complete on your screen.
  • As a consequence, drivers are successfully installed, and a “Printhead Alignment” page appears on your screen. Load a blank sheet of paper, choose “Printhead Alignment,” and click “NEXT” several times.
  • As a consequence, a test print window will appear; please press the “START” button.
  • When the test printing is finished, click “NEXT.” As a consequence, your printer has been connected to your computer.
  • Please tick the “Set As Default Printer” box if this is your default printer.
  • After you’ve finished installing your software, click “NEXT.”
  • You’ll see a list of Canon applications on your screen; please click “NEXT” here as well.
  • You will receive instructions on how to set up your mobile device after a few moments. When you press the “NEXT” button, a new window will open, allowing you to register your goods.
  • After completing the registration, you will be able to proceed with the installation.
  • As a consequence, you should be through with the above instructions; now pick “EXIT” to finish your Canon Pixma ts3122 Setup.

Leave a Comment

Your email address will not be published. Required fields are marked *