Eprinter Help

eprinter logo
hp envy 4501 setup

HP Envy 4501 Setup

This guide will show you how to use the HP Envy 4501 printer. The issue was not identified. The HP full feature driver is available for download from the software disc included in the box or from the HP website. The Guided Installer guides you through the process of setting up your printer through a WiFi or wired network connection. One of these error messages will show if the Installer fails to recognise your printer device after selecting the connection type. The printer could not be located. The printer could not be found, the device was not detected, or the printer was not found in your wireless network. To fix Printer Setup issues, follow these instructions.

Reboot all of your computers, printers, and routers.

You can use these procedures to temporarily disconnect your network and internet connections, as well as restart your computer equipment. Unplug the router’s power supply after that. Then, before closing down the computer, switch off the printer and close all open programmes. When you reconnect the router’s power cord, the internet activity light will blink, indicating that the connection has been restored. Now turn on your printer and computer. Reinstall HP Driver and Software to repair the HP Envy 4501 Printer. The problem has not yet been discovered.

Connections to the network and printers are up to date.

Check to see if your printer is network-capable. On the printer, go to the Wireless network or settings menu and make sure the wireless signal is turned on. The light on the wireless symbol should be stable and switched on. For a wired network connection, attach one end of the cable to the Ethernet port and the other end to the router’s accessible port. The green light should stay steady while the activity light blinks when the connection is established. Neither a guest nor a host network is linked to your printer. Change the band size to 2.4 GHz if your router cannot detect a network on band 5GHz. You can see the network name and connection status by hovering your mouse over the network icon. Then, by testing the network connection, troubleshoot the HP Envy 4501 Printer Not Found issue.

  • If the Connected network is not yours, rejoin to it and complete the setup process.
  • The network signal is degraded. Keep your computer and printer near the router, and keep large metal objects and radio-emitting devices out of the way.
  • If you are not connected to the network, ensure that it is operational and that the network status is right. Check that the network name is marked with a check mark.
  • Before attempting to connect to a wireless network, choose the Air Plane symbol and disable Air Plane mode.

Scan and Print Doctor from HP

HP offers the HP Print and Scan Doctor tool to easily identify and address printing and scanning issues with the HP Envy 4501 Printer. There were no outcomes detected. Download and use HP Print and Scan Doctor to simplify troubleshooting tasks. You’ll need to select your printer from the list when HP Print and Scan Doctor has been installed. If the Printer device is not displayed, select My Device Is Not Shown and Retry. You may potentially discover a connection issue by following the printer’s connecting procedure.

Firewall software should be turned off.

Firewall software often inhibits threats from the outside world, but it can also obstruct printer network connectivity. Use the HP Print and Scan Doctor to rapidly disable the firewall software to fix the HP Envy 4501 Printer Not Found issue. Then click Network, Troubleshooting firewalls, and disable the status from the HP Print and Scan Doctor Window. If the installation goes well, get help with firewall software that allows you to set the security level, trusted zone, and open port for communication between HP Software and websites.

HP software and drivers must be uninstalled.

At times, the software installation process may be incomplete or incorrect. Detach the USB cord from the printer if your printer and computer share a USB connection. Then, under Windows, look for Programs and Features and choose it from the list. To resolve HP Envy 4501 Printer Not Found, navigate to the list of installed programmes and select Uninstall. Follow the on-screen instructions to uninstall the software and restart your computing device.

HP Software Reinstallation

Get the most recent version of full-featured software for your printer equipment after removing the HP software. Your printer may gain new capabilities if you install the Full Feature Software. After that, turn on your printer and disconnect the USB cable from the printer. Go to HP Customer Support- Software and Driver Downloads to address HP Envy 4501 Printer difficulties. The issue was not identified. Choose printer, enter your printer model number, then click Submit in the Let’s Find Your Product window.