Canon Pixma TS3322

Printing is a breeze with the Canon PIXMA TS3322 All-in-One Printer. The PIXMA TS3322 is more than just a printer, with an easy-to-replace 2-cartridge FINE Hybrid Ink System, advanced settings through Wireless Connect, a Rear Paper Tray for fast and easy reloading of plain or picture paper, and a flatbed scanner. You can also print from your smartphone or tablet, as well as laptops and computers with built-in Wifi, using the Canon Print app.

Setting up a wireless connection from your smartphone is simple and takes only a few minutes. The PIXMA TS3322 is simple to use and replace, requiring only two FINE CARTRIDGES for excellent print quality. The built-in Wifi allows you to print from any location, including laptops, tablets, and cellphones.

The wireless setup for the Canon TS3322 is straightforward. Read this guide carefully to find out how to set up the Canon TS3322 and how to fix some of the most common TS3222 problems.

Manually set up or install the Canon TS3322

To use all of the printer’s features, you must first finish the Canon TS3322 manual setup method. Before you begin installing the Canon TS3322, make sure you have a secure internet connection and note down the SSID name and wireless network key. To manually set the Canon TS3322 Wireless Printer, please read the following instructions:

Power up the printer.
On the printer, choose the Easy Wireless Connect option.
Press and hold the Direct button for a few seconds.
Select the Startup option from the control panel.
Select your area and confirm that you agree to the License Agreement by pressing “Yes.”
To select the connecting method, click “Next.”
From the list of available wireless networks, choose your SSID.
Enter the password for the network.
Follow the on-screen directions and wait for the network configuration to finish.
When the Canon TS3322 Printer Setup is finished, click “Complete” to finish the setup.

What is the procedure for connecting my Canon Pixma TS3322 printer to my wireless network?

Reference : Copy Print Scan

Before you begin the process of manually connecting your Canon TS3322 printer to Wifi, you must first set up your printer by following the instructions outlined above. You can use the Canon TS3322 printer driver CD to connect your printer if it has a wireless connection. Otherwise, you can get the Canon TS3322 printer driver from Canon’s official website. To discover how to tether a Canon TS3322 printer to WiFi, follow the steps below:

Check to see if the printer is turned on.
To turn on your printer, press and hold the power button for a few seconds.
On your printer’s Control Panel, press and hold the home button.
Press the button for wireless settings.
Go to the wireless LAN setup page.
Select “basic wifi connect” from the drop-down menu.
Choose Yes.
Choose your preferred wireless network.
Enter the password for your wireless network.
After the printer planning is complete, finish the configuration program screen and the setup.

Canon TS 3322 Wireless Setup for Mac

To connect your Canon TS3322 printer to your Mac, simply follow the steps below:

Press the control button to turn on your printer.

Click on the Control Panel to see the wireless configuration option.
Choose a wireless connection method.

To obtain your printer driver, go to the Canon website or insert the setup CD into your device.

After the Canon Pixma TS3322 driver download is complete, open the download folder on your Mac.
From the configuration wizard tab, select next.

Select the install assistant option after entering your device’s username and password.

Select the option to begin the configuring operation.
Choose a suitable place and go to the next phase.
Select yes to accept the licence agreement.

Canon TS3322 Wireless Setup for Windows

Follow the steps below to set up the Canon TS3322 Printer wirelessly on a Windows device:

The Canon Pixma TS3322 driver can be downloaded from the Canon official website or imported and executed from the setup CD.

Open the configuration file and select Start Setup after the file is finished.

Select a suitable area before pressing the next button.
Select yes to accept the licence agreement.

On the survey, select I accept.
Choose the next option.
Select yes when the related form appears.

From the list, select one of the compatible wireless routers.
Click next after providing your network key password.

Continue pressing next until the connection has been established.
A print screen will appear.

Follow the computer’s instructions to run the test print.

Using Canon Pixma TS3322 ink cartridges and replacing them

To complete the Canon TS3322 ink refill, follow the procedures below:

Check to see if the printer is turned on.
Raise the cover of the scanner or the scanner itself.
The holder for the print head will be moved to the new location.
When the ink cartridge is empty, press tab A and elevate the cartridge to remove it.
Take the new ink cartridge out of its packaging and discard the orange safety tape and film.
Hold the Canon Pixma TS3322 ink cartridge so that the orange safety cover is facing up and the white outline air hole is visible.
Raise the tab to remove the orange safety band.
Slightly angle the ink cartridge’s front side into the print head.
Check that the ink cartridge labels are identical.
Press down firmly on the ink cartridge’s top until it clicks into place.
Close the lid after scanning is complete.
The Canon Pixma TS3322 ink installation is complete.

Troubleshooting Canon TS3322 Wireless Setup

Why won’t my Canon TS3322 print come out?

If your Canon TS3322 printer isn’t printing, make sure it’s connected to the computer properly. After that, make sure the printer and computer are both connected to the same wireless network. It’s also a good idea to double-check that the printer and rear tray settings are the same. Finally, remove any print jobs that are no longer needed from your printer. To fix the Canon TS3322 printer error, reinstall the Canon TS3322 Printer Driver.

Why is my Canon TS3322 scanner not working?

Your Canon TS3322 scanning error can be caused by a variety of things. To fix the issue, follow the instructions below:

Open your Canon TS3322 printer and begin printing.
Connect the USB cord that came with the printer to a USB port on your computer.
Check the network’s connectivity status. If there is a problem, reset the connection setup.
Scan your papers after restarting your computer.

What should I do if my Canon TS3322 printer ceases to function?

To fix your offline error, follow the steps below:

Go to the laptop’s Start menu.
Select Control Panel from the Start menu.
Select devices and printers from the control panel.
Right-click on your printer icon and select Use Printer Online from the drop-down menu.

How do I finish the Canon TS3322 wifi configuration?

To finish your Canon Pixma wireless setup, follow the steps below.

On the printer, turn on the Easy Wireless Connect feature.
Press and hold the Direct button for a few seconds.
Select the Start-up option from the initial screen.
Select your area and confirm that you agree to the License Agreement by pressing “Yes.”
To select the connecting method, click “Next.”
From the list of available wireless networks, choose your SSID.
Enter the password for the network.
Follow the on-screen directions and wait for the network configuration to finish.
When the Canon TS3322 Printer Setup is finished, click “Complete” to finish the setup.

On the Canon Pixma TS3322, how can I alter the print quality?

To increase the print quality of your Canon TS3322, follow these steps:

On your computer, go to the Printer Driver Configuration Wizard and pick “Print Quality.”
Select the custom option from the Main tab.
In the Custom dialog box, select “Print Quality Level” and click OK.
The print output standard is correctly set till the configuration process is completed.

How do you clear a paper jam on a Canon TS3322 printer?

To fix your paper jamming problem, follow the procedures below:

Unplug and turn off the printer.
Remove the printer’s front cover.
Pull the print head to the right to remove it.
Shift the printer to the right to uncover the gears; gently turn the gears back and forth a few times.
Start your printer and print a practice page.